[2026] Pass your 350-801 exam with this 100% Free 350-801 Braindump

View All 350-801 Actual Exam Questions, Answers and Explanations for Free

Certification Path for Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)

This course will help you:

• Integrate and troubleshoot Cisco Unified Communications Manager with Lightweight Directory Access Protocol (LDAP) for user synchronization and user authentication
• Implement Cisco Unified Communications Manager provisioning features
• Configure and troubleshoot collaboration endpoints
• Earn 64 credits toward recertification

This exam is for:

• Systems engineers
• Network administrators
• Students preparing to take the CCNP Collaboration certification
• Network engineers

To prepare for the Cisco 350-801 exam, candidates can take advantage of various study materials, such as official Cisco training courses, study guides, and practice exams. It is also recommended that candidates have hands-on experience with Cisco collaboration technologies and have a good understanding of networking concepts.

 

NEW QUESTION # 60
An engineer is configuring a BOT device for a Jabber user is Cisco Unified Communication Manager.
Which phone type must be selected?

• A. third-party SIP device
• B. Cisco Dual Mode for iPhone
• C. Cisco Dual mode for Android
• D. Cisco Unified Client services Framework

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_5/CJAB_BK_D00D8CBD_00_d eployment-installation-guide-cisco-jabber115/CJAB_BK_D00D8CBD_00_deployment-installation- guide-cisco-jabber115_chapter_01000.html

NEW QUESTION # 61
How does traffic policing respond to violations?

• A. Excess traffic is queued.
• B. Excess traffic is retransmitted.
• C. Excess traffic is dropped.
• D. AH traffic is treated equally.

Answer: C

NEW QUESTION # 62
Which device is a Cisco IP Phone 8800 series phone registered in, if it was registered using Mobile and Remote Access?

• A. Cisco UCM
• B. Cisco Unified Presence
• C. Cisco Expressway-E
• D. Cisco Expressway-C.

Answer: D

NEW QUESTION # 63
An engineer implements a new Cisco UCM based telephony system per these requirements:
* The local Ethernet bandwidth is sized based on the total bandwidth per call
* A G.736 codec is used.
* The bit rate is 64 kbps
* The codec sample interval is 10 ms.
* The voice payload size is 160 bytes per 20 ms.
What should the size of the Ethernet bandwidth be per call?

• A. 87.2 kbps
• B. 31 2 kbps
• C. 38.4 kbps
• D. 55.2 kbps

Answer: B

NEW QUESTION # 64
An administrator needs to create a partial PRI consisting of the first seven timeslots available. Which configuration snippet configures the ISDN E1 PRI for this task?

• A.
• B.
• C.
• D.

Answer: A

NEW QUESTION # 65
Refer to the exhibit. When a UC Administrator is troubleshooting DTMF negotiated by this SIP INVITE, which two messages should be examined next to further troubleshoot the issue?
(Choose two.)

• A. NOTIFY
• B. UPDATE
• C. REGISTER
• D. PRACK
• E. SUBSCRIBE

Answer: A,E

NEW QUESTION # 66
Refer to the exhibit. In this cisco UCM setup configured for EARLY offer, what is the codec preference line in the initial SIP INVITE SDP?

• A. m=audio 16444 RTP/AVP 9 18 101
• B. m=audio 16444 RTP/AVP 0 8 18 101
• C. m=audio 16444 RTP/AVP 9 0 8 18 101
• D. m=audio 16444 RTP/AVP 18 101

Answer: D

Explanation:
40kbps will not allow G.711 & G.722 to be advertised as they have bandwidth of 64kbps, only G).729 will be allowed.
https://en.m.wikipedia.org/wiki/RTP_payload_formats

NEW QUESTION # 67
Refer to the exhibit.

Refer to the exhibit. A collaboration engineer adds a redundant NTP server to an existing Cisco Collaboration solution On the Cisco UCM OS Administration page, the new NTP server shows as "Not Accessible" Which action resolves this issue?

• A. Configure the "reach" value as "377" for the new NTP server.
• B. Delete and re-add the new NTP server via the Cisco UCM command-line interface
• C. Restart NTPD on the Cisco UCM server.
• D. Start the NTP service on the new NTP server

Answer: D

NEW QUESTION # 68
What are two common attributes of XMPP XML stanzas? (Choose two.)

• A. version
• B. from
• C. destination
• D. Source
• E. to

Answer: B,E

NEW QUESTION # 69
An engineer must configure a route pattern that can route all +E.164 globalized international numbers for the plans of all countries. Which Cisco UCM configuration accomplish this task?

• A.
• B.
• C.
• D.

Answer: C

NEW QUESTION # 70
Refer to the exhibit. An administrator is attempting to register a SIP phone to a Cisco UCM but the registration is failing. The IP address of the SIP Phone is 10.117.34 222 and the IP 1 address of the Cisco UCM is 10.0.101.10. Pings from the SIP phone to the Cisco UCM are successful.
What is the cause of this issue and how should it be resolved?

• A. The certificates on the SIP phone are not trusted by the Cisco UCM. The SIP phone must generate new certificates.
• B. An network device is blocking TCP port 5060 from the SIP phone to the Cisco UCM. This device must be reconfigured to allow traffic from the IP phone.
• C. DNS lookup for the Cisco UCM FQDN is failing. The SIP phone must be reconfigured with the proper DNS server.
• D. An NTP mismatch is preventing connection of the TCP session between the SIP phone and the Cisco UCM. The SIP phone and Cisco UCM must be set with identical NTP sources.

Answer: B

NEW QUESTION # 71
Refer to the exhibit.

You deploy Mobile and Remote Access for Jabber and discover that Jabber for Windows does not register to cisco Unified Communications Manager while outside of the office. What is a cause of this issue?

• A. The DNS record should be changed from _collab-edge._tls example.com.
• B. The DNS record should be created for _ cisco-uds._tcp example.com.
• C. The DNS record type should be changed from SRV to A.
• D. Server 4.2.2.2 is not a valid DNS server.

Answer: A

NEW QUESTION # 72
In which location does an administrator look to determine which subscriber the phone registers to if loses registration with the current Cisco UCM subscriber?

• A. On Cisco UCM Administrator page system > Device Pool > Cisco UCM group
• B. On Cisco UCM Administration Page Device > Phone > Phone Configuration page
• C. On Cisco UCM Administrator Page server > Cisco UCM
• D. On Cisco UCM Administrator page system > Enterprise Parameters

Answer: A

NEW QUESTION # 73
Which actions required for a firewall configuration on a Mobile and Remote Access through Cisco Expressway deployment?

• A. The internal firewall must allow these inbound and outbound connections between expressway - c and Expressway-e :sip;HTTPS(tunneled over SSH between C and E.
  TCP 2222: TCP 7001: Traversal Media: UDP 2776 to 2777(or 36000 to 36011 for large VM
  /appliance); XMPP:TCP 7400
• B. Do not use a shared address for Expressway-e and Expressway-c, as the firewall cannot distinguish between them. If static NAT for IP addressing on Expressway-e is used, ensure that any NAT operation on expressway-c does not resolve the same traffic IP address. Shared NAT IS not supported
• C. The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061; HTTPS:
  TCP 8443; XMPP TCP 5222; media: UDP 36002 to 59999
• D. The traversal zone on Expressway-c points to Expressway-e through the peer address field on the traversal zone, which specifies the Expressway-e server address. For dual NIC deployments, set the Expressway-e address using an FQDN that resolves the IP address of the internal interface

Answer: C

NEW QUESTION # 74
Which two types of device are supported by the Bulk Administration Tool? (Choose two.)

• A. music on hold servers
• B. Cisco Unified IP phones (all models)
• C. SIP trunks
• D. H.322
• E. H.225 trunks

Answer: B,D

Explanation:
Section: Protocols, Codecs, and Endpoints

NEW QUESTION # 75
A SIP phone has been configured in the system with MAC address 0030.96D2.D5CB. The phone retrieves the configuration file from the Cisco UCM. Which naming format is the file that is downloaded?

• A. SEP003096D2D5CB.cnf.xml
• B. SIP003096D2D5CB.cnf
• C. SEP003096D2D5CB.cnf
• D. SIP003096D2D5CB.cnf.xml

Answer: A

NEW QUESTION # 76
SIP proxies have operations defined in RFC 3261 and supporting extensions. Though no lETF RFC completely defines how SBCs must function. SBCs evolved over the years.
Which two operations demonstrate the high-level differences between SBCs and SIP proxies? (Choose two.)

• A. Stateful proxies are context-aware and can terminate communication sessions by themselves
• B. SBCs can modify headers such as To, From, Contact, and Call-D.lt can introduce new headers into the SIP message
• C. SBCs are capable of interworking completely different protocols to set up, modify, and tear down communication sessions. It includes SIP, H.323,and MGCP protocols
• D. SIP proxies are SDP-aware and can change the SDP bodies
• E. SlP proxies add a Via header and optionally a Record-Route header, and the rest of the headers are left untouched

Answer: C,E

NEW QUESTION # 77
Which two approaches are taken to implement CAC within Cisco UCM in full-mesh topology? (Choose two.)

• A. location-based CAC
• B. device pool
• C. Audio Codec Preference List
• D. RSVP-enabled locations
• E. physical location

Answer: A,B

Explanation:
Section: QoS

NEW QUESTION # 78
Refer to the exhibit. An administrator configured a codec preference list with 0,122 and ILBC codecs. Which change must the administrator make in the dial-peer section of the configuration to use this list?

• A. add voice-codecs 20
• B. add codec preference 20
• C. add session codec 20
• D. add voice-class codec 20

Answer: D

NEW QUESTION # 79
In an eleven-class queueing model following Realtime. Best effort, and scavenger queuing rules.
What recommended percentage of bandwidth must be allocated for interactive video?

• A. 10%
• B. 15%
• C. 20%
• D. 12%

Answer: B

NEW QUESTION # 80
Refer to the exhibit. Cisco Unified Border Element is attempting to establish a call with Subscriber
1, but the call fails. Cisco Unified Border Element then retries the same call with Subscriber 2, and the call proceeds normally. Which action resolves the issue?

• A. Verify that the Run On All Active Unified CM Nodes checkbox is enabled.
• B. Verify that the Significant Digits field for Inbound Calls is set to All.
• C. Verify that the correct calling search space is selected for the Inbound Calls section.
• D. Verify that the PSTN Access checkbox is enabled.

Answer: C

NEW QUESTION # 81
......

Cisco 350-801 certification exam is targeted at professionals who want to prove their expertise in collaboration technologies. Implementing and Operating Cisco Collaboration Core Technologies certification exam is a crucial step in a candidate's career, as it demonstrates their proficiency in implementing and operating Cisco collaboration technologies. 350-801 exam is also ideal for professionals working in the fields of voice and video technologies, collaboration engineers, and network administrators.

 

350-801 dumps Free Test Engine Verified By It Certified Experts: https://passguide.vce4dumps.com/350-801-latest-dumps.html