Dumps of D-NWG-DS-00 Cover all the requirements of the Real Exam

Correct Practice Tests of D-NWG-DS-00 Dumps with Practice Exam

NEW QUESTION # 33
What is the purpose of verifying the EDP pre-deployment checklist before a network deployment?
Response:

• A. To configure security policies
• B. To confirm the deployment is aligned with enterprise standards and policies
• C. To ensure that all devices have the latest firmware
• D. To assign IP addresses to network devices

Answer: B

NEW QUESTION # 34
Which of the following are critical in planning for network segmentation using Layer 2 technologies?
Response:

• A. Fibre Channel zoning and thin provisioning
• B. VLAN segmentation and MAC address management
• C. IP address allocation and subnetting
• D. Subnetting and routing protocols

Answer: B

NEW QUESTION # 35
Why is it important to involve deployment support during the installation of networking equipment?
Response:

• A. To handle network traffic monitoring
• B. To ensure that devices are properly configured and operational
• C. To create VLAN assignment tables
• D. To implement routing protocols

Answer: B

NEW QUESTION # 36
What are three design best practices when discussing the potential for a network replacement?
Response:

• A. Provide support for onsite replacement.
• B. Recommend the one-size-fits-all solutions in the Dell Portfolio.
• C. Review existing network configurations for Dell, Cisco, and HP switches.
• D. Document the replacement steps.
• E. Remove and decommission the hardware.

Answer: A,C,D

NEW QUESTION # 37
What is the main function of CloudIQ in the planning and management of Dell PowerSwitch devices?
Response:

• A. Enables predictive analytics and performance monitoring
• B. Manages firewall rules and security policies
• C. Provides cloud-based storage for network configurations
• D. Provides licensing for PowerSwitch devices

Answer: A

NEW QUESTION # 38
A customer project requires additional scaling based on increased application and server workloads. What is recommended for the scaling?
Response:

• A. The VLTi links should be equal to or greater than the uplink bandwidth.
• B. Divide the total server count by two to determine the needed number of VLTi links.
• C. Use a minimum of one port using the fastest switch port.

Answer: A

NEW QUESTION # 39
Which type of file is required for FastScript to work with Enterprise Project Services?
Response:

• A. JSON
• B. YAML
• C. EXE
• D. XLSX

Answer: A

NEW QUESTION # 40
Layer 2 (L2) planning focuses on the configuration of __________, such as VLANs and MAC address management, to optimize network traffic flow.
Response:

• A. IP addresses
• B. Firewalls
• C. Switches
• D. Routing protocols

Answer: C

NEW QUESTION # 41
Which of the following are responsibilities of a network design professional?
Response:

• A. Developing a security architecture
• B. Identifying business requirements
• C. Writing software code
• D. Providing disaster recovery options

Answer: A,B,D

NEW QUESTION # 42
Which of the following tasks can be automated using FastScript in a networking project?
Response:

• A. Routing table updates
• B. VLAN configuration
• C. Device monitoring
• D. IP address assignment

Answer: A,B,D

NEW QUESTION # 43
Which component of network documentation is essential to ensure the design meets security policies?
Response:

• A. Security Policy Checklist
• B. VLAN Assignment Template
• C. Post-Deployment Verification
• D. Network Topology Diagram

Answer: A

NEW QUESTION # 44
A customer wants to replace an existing third-party network with a Dell networking environment and redesign their environment to a modern architecture. What service meets the needs of the customer?
Response:

• A. ProDeploy Plus
• B. Custom SOW
• C. ProDeploy
• D. Additional Deployment Time

Answer: B

NEW QUESTION # 45
Match the following scripting tools with their respective functions in network design:
Tool
FastScript
Unisphere for PowerMax
Solve Online
EPS Tool
Function
A) Automates network configuration tasks
B) Monitors and manages network performance
C) Provides step-by-step guidance for maintenance
D) Estimates power and environmental requirements
Response:

• A. FastScript - A
• B. FastScript - A
• C. FastScript - A
• D. FastScript - D

Answer: B

NEW QUESTION # 46
A delivery engineer is deploying a pair of Dell PowerSwitch S5232F-ON switches for a VxRail deployment. What is the correct order of steps for configuring the switches?
Response:

• A. Connect to OS10 Web UI.
• B. Connect to OS10 Web UI.
• C. Connect to OS10 Web UI.
• D. Connect to OS10 Web UI.

Answer: C

NEW QUESTION # 47
In the documentation process, a __________ template is used to record any issues encountered during the network's operation and their resolution.
Response:

• A. Topology Design
• B. Troubleshooting
• C. Pre-Deployment
• D. VLAN Assignment

Answer: B

NEW QUESTION # 48
What are two roles of a design architect?
Response:

• A. Communicating with sales and the delivery team
• B. Planning for upgrading an existing network device in a customer's environment
• C. Updating the PM and account team if additional orders are required
• D. Creating a new order list while planning for a network change

Answer: A,C

NEW QUESTION # 49
A customer environment consists of the following hardware:
- 1x MX7000 with 2x MX9116n FSE
- 4x M760c blades each with a dual port network interface controller
- 2x 32 G FC switches
- 1x FC Storage Array
What are three requirements for FCoE in this environment?
Response:

• A. FCoE partition must be created in NPAR on the blade servers.
• B. NPIV must be enabled on the Upstream Switch.
• C. A one-to-one connection must exist between the MX9116n and the upstream FC switch.
• D. Zoning must be configured on the MX9116n switch.
• E. Link Layer Flow Control receive must be enabled.

Answer: A,B,C

NEW QUESTION # 50
......

Sample Questions of D-NWG-DS-00 Dumps With 100% Exam Passing Guarantee: https://passguide.vce4dumps.com/D-NWG-DS-00-latest-dumps.html