JN0-363 Free Exam Questions and Answers PDF Updated on Nov-2023

Latest JN0-363 Exam Dumps Recently Updated 265 Questions

Juniper JN0-363 exam is an excellent way for service provider professionals to validate their skills and demonstrate their expertise in routing and switching technologies. By earning the JNCIS-SP certification, candidates can enhance their career prospects and gain the recognition they deserve as experts in their field.

Juniper JN0-363 exam is designed for professionals who want to prove their expertise in service provider routing and switching. JN0-363 exam is the industry standard for service provider networks and is recognized globally. The JN0-363 exam is a specialist level certification that tests the candidate's knowledge and skills in service provider routing and switching technologies.

Juniper JN0-363 certification exam is designed for IT professionals who are interested in working with service provider routing and switching technologies. This specialist certification is an excellent way for IT professionals to demonstrate their expertise in this field and showcase their skills to potential employers.

 

NEW QUESTION # 107
Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

• A. The BGP peerings between R1, R2, and R3 should use physical interface addresses
• B. The BGP peering between R1 and R4 should use physical interface addresses
• C. The BGP peerings between R1, R2, and R3 should use loopback interface addresses
• D. The BGP peering between R1 and R4 should use loopback interface addresses

Answer: B,C

NEW QUESTION # 108
Which two statements correctly describe the BGP community attribute? (Choose two.)

• A. The community attribute is an optional nontransitive attribute.
• B. Only one community can be associated with a route.
• C. Multiple communities can be associated with a route.
• D. The community attributes is an optional transitive attribute.

Answer: C,D

NEW QUESTION # 109
Click the Exhibit button.

You are asked to configure OSPF for the network?
Referring to the exhibit, how should Area 1 be configured?

• A. backbone area
• B. stub area
• C. totally stubby area
• D. not-so-stubby area

Answer: B

Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf-areas.html

NEW QUESTION # 110
You are advertising a summary route that represents your local network (172.20.0.0716) to both ISP A and ISPB. You want to influence all traffic sent to you from ISP C to go through R2.
How would you accomplish this task?

• A. On R2. prepend your AS number three times on the 172.20.0.0/16 route when advertising it to ISP 2.
• B. On R2, change the local preference value to 50.
• C. On R1, change the local preference value to 250.
• D. On R1, prepend your AS number three times on the 172.20.0.0/16 route when advertising It to ISP 1.

Answer: C

NEW QUESTION # 111
Which two fields of a hello packet must match on both routers when forming an OSPF adjacency? (Choose two.)

• A. Designated route
• B. Hello interval
• C. Network mask
• D. Router priority

Answer: B,C

NEW QUESTION # 112
In an IS-IS network, which device represents the pseudo-node?

• A. an area border router
• B. a router connected to the backbone
• C. a router with an IS-IS export policy
• D. a designated intermediate system

Answer: D

NEW QUESTION # 113
Click the Exhibit.

On an MX Series device, you must enable routing between VLANs 100,200, and the Internet ge-5/1/0, and ge-5/1/2 are bundled into interface ae3. Ge-5/1/4, and ge-5/1/5 are bundles into interface ae2. Both AE bundles trunk VLANs 100 and 200.
In this scenario, what is the correct configuration snippet for VLAN 100?

• A. interfaces {xe-2/1/0 {unit 0{family inter {address 10.0.10.2/24;}}}irb {unit 0{family inet {address 10.0.1.2/24;}}unit 1 family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;routing-interface irb.0;}}
• B. interfaces {xe-2/1/0 {unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0 {unit 0 {family inet {address 10.0.1.2/24;}}unit 1 {family inet {address 10.0.2.2/24;}}}} bridge-domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface xe-2/1/0.0;interface ae1.100;interface ae3.100interface ip-0/0/0.0;}}
• C. interfaces {xe-2/1/0{unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0{unit 0{family inet {address 10.0.1.2/24;}}unit 1{family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;interface ip-0/0/0.0;}}
• D. interfaces {xe-2/1/0 {unit 0 {family inet {address 10.0.10.2/24;}}}irb {unit 0{family inet {address 10.0.1.2/24:}}unit 1 {family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;}}

Answer: D

NEW QUESTION # 114
You notice that the RID of your router is being taken from the address of your management interface.
What could cause this scenario?

• A. The loopback address was configured with a /32 address.
• B. The loopback address was configured under [edit routing-options].
• C. A suitable loopback address was not configured on the router.
• D. The loopback address was not configured under [edit protocols ospf].

Answer: C

NEW QUESTION # 115
Referring to the exhibit, what is the minimum number of LSPs required to support alt four networks?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

NEW QUESTION # 116
Click the Exhibit button. Based on the configuration shown in the exhibit, what will be the state of the IS-IS levels on interface ge-0/0/0.100?

• A. Level 1 is disabled and Level 2 is disabled.
• B. Level 1 is disabled and Level 2 is enabled.
• C. Level 1 is enabled and Level 2 is disabled.
• D. Level 1 is enabled and Level 2 is enabled.

Answer: A

NEW QUESTION # 117
Click the exhibit.

Customer 1 has experienced some hardware failures that erroneously transitioned some links into a forwarding state, as shown in the exhibit.
In this scenario, which STP feature set would solve this problem?

• A. BPDU protection
• B. MAC movement protection
• C. Loop protection
• D. Root protection

Answer: C

NEW QUESTION # 118
Exhibit

The LSP is not establishing correctly.
Referring to the exhibit, what should you do to solve the problem?

• A. Enable traffic engineering for the RSVP protocol.
• B. Enable traffic engineering for the OSPF protocol.
• C. Enable traffic engineering for the BGP protocol.
• D. Enable traffic engineering for the IS-IS protocol.

Answer: A

NEW QUESTION # 119
Which statement is correct about the FE80;:/10 prefix?

• A. This prefix range is used for the link local address.
• B. This prefix range is reserved for multicast applications
• C. This prefix range is used on the loopback interface.
• D. This prefix range is not reserved.

Answer: A

NEW QUESTION # 120
Which three statements are true about the BGP community attribute? (Choose three.)

• A. Routing policies can be simplified using BGP communities.
• B. Communities are used in the route selection process.
• C. Communities can be used to signal local preference in other AS networks.
• D. Only well-known communities can be passed between AS networks.
• E. There are three well-known communities.

Answer: A,C,E

NEW QUESTION # 121
Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?

• A. 192.108.1.4
• B. 172.26.4.0730
• C. 192.168.1.3
• D. 172.18.1.0/24

Answer: B

NEW QUESTION # 122
Click the Exhibit button. The policy shown in the exhibit has been configured and installed on your router.

What is the result of applying this policy?

• A. The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.
• B. The 172.18.1.0/32 network will be redistributed into OSPF as an external route.
• C. The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.
• D. The 172.18.1.0/24 network will be redistributed into OSPF as an external route.

Answer: D

NEW QUESTION # 123
Click the Exhibit button. In the exhibit, three IPv6 addresses are listed. Which two statements are true? (Choose two.)

• A. The third address is not formatted correctly.
• B. All three addresses are the same.
• C. The second address is incomplete and not correct.
• D. The first address is complete and correct.

Answer: B,D

NEW QUESTION # 124
You configured interface ge-0/070.0 to run IS-IS. but this interface does not appear in the output of the show isis adjacency command as shown in the exhibit.

What is the problem in this scenario?

• A. The family iso statement must be added to the logical interface.
• B. The router at the other end of the link Is not sending any IS-IS Hello messages.
• C. This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g statement.
• D. The router at the other end of the link is a Level 1 only router.

Answer: A

NEW QUESTION # 125
Click the Exhibit button. After the MAC learning limit of 3000 is reached for the bd bridge domain as shown in the exhibit, what happens to frames that arrive that contain unknown unicast destination addresses?

• A. They are flooded.
• B. They are forwarded to the IRB interface.
• C. The are forwarded to the default gateway.
• D. They are dropped.

Answer: A

NEW QUESTION # 126
You are configuring a default static route using the default preference value. You want to ensure that any static route that you configure in the future will be less preferred than the OSPF routes that are configured on the network.
Which command will accomplish this task?

• A. set routing-options static route <IP address> preference 9
• B. set routing-options static defaults passive
• C. set protocols ospf preference 6
• D. set routing-options static defaults preference 20

Answer: D

NEW QUESTION # 127
What is the correct description of an Area Border Router (ABR)?

• A. An ABR is an OSPF router with all of its links within an area
• B. An ABR is an OSPF router with at least one link in a Layer 2 area
• C. An ABR is an OSPF router with links in two areas, connecting OSPF areas to the backbone
• D. An ABR is an OSPF router that injects routing information from outside the OSPF AS

Answer: C

NEW QUESTION # 128
Which new field is added to an IPv6 header as compared lo IPv4?

• A. flow label
• B. fragment offset
• C. version
• D. checksum

Answer: A

NEW QUESTION # 129
......

Juniper JN0-363 Real 2023 Braindumps Mock Exam Dumps: https://passguide.vce4dumps.com/JN0-363-latest-dumps.html